Blog
Payroll
Payroll compliance
Time tracking

Which states require reporting time pay in construction?

Rachel Banton
Rachel Banton
Product Manager - Payroll
Published on
reporting time pay

Because construction worksites are unpredictable, so is payroll processing. A crew might arrive on site ready to work but get turned away because of a rainout, failed inspection, or delayed concrete delivery. In several states, contractors are legally obligated to compensate these workers with reporting time pay, even if they didn’t perform any work.

Payroll compliance becomes especially complicated for construction companies operating across state lines. Reporting pay rules differ by jurisdiction, and a practice that complies with one state’s labor laws might create liability elsewhere. This guide explains how reporting time pay works, which states require it, and how to calculate it correctly.

What is reporting time pay?

Reporting time pay, otherwise known as show-up pay and call-in pay, refers to compensation contractors must offer when an employee arrives for a shift but receives less work than expected or no work at all. 

The Fair Labor Standards Act (FLSA) establishes federal rules for compensating actual hours worked, minimum wage standards, and overtime pay requirements. But reporting time pay is governed by state laws and contractual agreements.

Reporting pay obligations can arise due to:

  • Weather delays and rainouts
  • Failed or delayed inspections
  • Material or equipment delivery delays
  • Equipment breakdowns
  • Subcontractor or trade-stacking delays
  • Safety hazards
  • Permit or approval delays
  • Overstaffing or construction scheduling issues

Say a drywall crew reports to a commercial project for an eight-hour scheduled shift, but as they arrive, the superintendent discovers incomplete electrical rough-in work. After waiting an hour, the crew gets instructions to leave the worksite. In some states, the employer only owes the crew their wages for that hour. In others, they have to pay workers more.

Which states require reporting time pay?

The following states, plus Washington D.C., maintain reporting pay laws. Some apply the same rules across the board, while others target specific industries.

California

Under Wage Order 16, construction employees who report to work and receive less than half their expected hours generally must be paid for half the scheduled shift at their regular rate of pay. The rule includes a minimum of two hours’ pay and a maximum of four.

Example: Heavy rain shuts down an eight-hour framing shift after one hour. 

  • Scheduled shift: Eight hours
  • Actual work: One hour
  • Employee rate of pay: $42 per hour
  • Minimum payment: $168 ($42 times four hours)

Employees working under collective bargaining agreements (CBAs) are covered under this rule unless the agreement explicitly states otherwise. This standard differs from other California labor provisions, such as the 30% above minimum CBA exemption that applies to overtime and meal periods.

Connecticut

Connecticut reporting pay guarantees apply to certain industries, including mercantile and restaurant occupations. Contractors generally have no reporting pay obligation under state law.

Maine

If an employer asks an employee to report to work, then reduces their hours or cancels the shift, the company must pay the employee. They either owe the employee two hours’ regular pay or the total pay for the scheduled shift, whichever is less. 

Example: A punch-list crew reports for a four-hour shift that the GC cancels on arrival.

  • Scheduled shift: Four hours
  • Actual work: None
  • Employee rate of pay: $32 per hour
  • Minimum payment: $64 ($32 times two hours)

Massachusetts

When an employee reports for a shift of three hours or more and receives less work than expected, Massachusetts requires at least three hours of pay at no less than the state minimum wage. No construction-specific exemption applies.

Example: A failed inspection cancels a scheduled concrete pour.

  • Scheduled shift: Six hours
  • Actual work: None
  • State minimum wage: $15 per hour
  • Minimum payment: $45 ($15 times three hours)

New Hampshire

Employees who report to work at their employer’s request are entitled to at least two hours of pay at their regular rate. Municipal employees and ski instructors are exempt.

Example: A site super asks an excavation worker to come in and dig a trench. Equipment failure ends work shortly after the laborer arrives.

  • Scheduled shift: Five hours
  • Actual work: 30 minutes
  • Employee rate of pay: $30 per hour
  • Minimum payment: $60 ($30 times two hours)

New Jersey

Employees who report as directed must receive at least one hour of pay at the applicable wage rate. However, an exemption may apply if the employer provides the minimum hours agreed upon before the shift.

Example: A safety hazard prevents a trenching crew from working.

  • Scheduled shift: Eight hours
  • Actual work: 15 minutes
  • Employee rate of pay: $28 per hour
  • Minimum payment: $28 (pay for one hour)

New York

Employees who report to work at the employer’s request must receive at least four hours of pay at minimum wage, or pay for their regularly scheduled shift if it’s shorter than four hours. Contractors managing public works jobs must pay employees their prevailing wage rate rather than minimum wage. New York’s hospitality-industry tiered reporting rules don’t apply to construction. 

Example: Missing materials prevent a masonry crew from starting work in New York City.

  • Scheduled shift: Six hours
  • Actual work: None
  • State minimum wage: $17 per hour
  • Minimum payment: $68 ($17 times four hours)

Note that different jurisdictions in New York have distinct minimum wage requirements. New York City, Long Island, and Westchester County all require $17 an hour at a minimum. The rest of the state is at $16.00 an hour.

Oregon

While Oregon doesn’t have a general reporting pay law for adult employees, the state does require employers to provide “adequate work” for minor employees. Minors who report as scheduled must receive enough work or compensation to earn at least half of their regularly scheduled earnings or one hour’s wages, whichever is higher. 

This regulation won’t apply if: 

  • The employer establishes a clear policy explaining how they’ll notify workers not to come in.
  • These rules are posted clearly in a commonly frequented area of the site.
  • The employer explains this policy clearly on the minor’s first day.
  • AND
  • The employer makes a good-faith effort to reach the employee before they leave their house.

Since Oregon has strict rules regulating the employment of minors, especially in construction and other potentially hazardous occupations, this requirement rarely applies to contractors.

Example: A 17-year old worker who’s on-site to clean up debris is sent home shortly after arriving because a trade-stacking conflict closes the work area.

  • Employee age: 17
  • Scheduled shift: Four hours
  • Employee rate of pay: $18 per hour
  • Minimum payment: $36 (half of $18 times four hours)

Rhode Island

When an employee reports for a shift and receives fewer than three hours of work, the employer must generally provide at least three hours of compensation at the worker’s usual rate. This requirement applies independently of Rhode Island’s separate Sunday and Holiday wage laws.

Example: Severe weather halts a roofing project before work begins.

  • Scheduled shift: Eight hours
  • Actual work: None
  • Employee rate of pay: $28 per hour
  • Minimum payment: $84 ($28 times three hours)

Washington D.C.

Employers generally must compensate employees who report as scheduled for at least four hours of pay. Contractors must pay workers at their usual rate for any hours they actually worked, while unworked hours can be paid at minimum wage.

Example: An electrical crew is sent home after discovering a leak.

  • Scheduled shift: Eight hours
  • Actual work: One hour
  • Employee rate of pay: $35 per hour
  • D.C. minimum wage: $18.40 per hour
  • Minimum payment: $90.20 ($35 for the one hour worked, plus $55.20 for three additional reporting pay hours)

Common exemptions and exceptions for reporting time pay

Even in jurisdictions with reporting pay laws, several exemptions may eliminate the usual obligation:

  • Acts of God: Natural disasters, power outages, and other events outside the employer’s control may exempt reporting pay requirements.
  • Good-faith advance notice not to report: Employers may avoid reporting time pay by notifying employees before they begin commuting. Documented calls or texts can help establish compliance.
  • CBA weekly-hour guarantees: Minimum-pay or guaranteed-hour provisions in CBAs may satisfy reporting pay obligations, depending on state law.
  • Voluntary early departure: Reporting pay may not apply if an employee leaves early for personal reasons such as childcare or transportation concerns.
  • Paid on-call arrangements: Employers already compensated for standby time may not qualify for additional reporting pay.
  • Short scheduled shifts: Some laws limit reporting pay to the hours originally scheduled, even when the statutory minimum is higher.

How construction payroll teams calculate and comply with reporting time pay: 6 steps

Because reporting pay requirements vary by state, payroll teams need a consistent process for identifying, calculating, and documenting these payments across projects. Below are six main steps to follow.

1. Confirm which state’s rule applies based on jobsite location

A contractor who dispatches the same crew to Oregon on Monday and California on Wednesday must follow each state’s rules on the correct day based on the crew’s location.

2. Identify which employees and shifts are covered

Coverage varies by jurisdiction and industry. California explicitly covers construction through Wage Order 16, but Connecticut’s rules generally exclude construction. Payroll should verify coverage before calculating any amount.

3. Compare scheduled time and actual hours worked

The difference between planned hours and actual labor time triggers reporting pay requirements. Accurate records help determine where the employee was and whether they’re entitled to pay under state law.

4. Apply the correct pay rate for that state

Some states mandate payment at the employee’s regular rate, while others only require minimum wage for unworked time. Payroll staff should calculate the payment using the standard in the correct jurisdiction.

5. Document notice given to the employee to support an exemption claim (if applicable)

Timestamped texts and call logs, dispatch records, and scheduling software entries help demonstrate that notice reached the worker before they started commuting, which may lead to an exemption.

6. Review union or wage agreements for a separate minimum-hours guarantee

These agreements often create worker guarantees that exceed state requirements. In California, a CBA can also alter reporting pay rules if it expressly addresses the issue. Careful contract review helps prevent payroll errors and disputes.

How Miter handles reporting time pay for construction payroll 

Contractors must apply the correct state-specific reporting time pay laws to each jobsite they manage, keep track of exemptions, and act in accordance with CBAs and wage agreements that exceed state requirements. 

Miter helps contractors navigate multi-state payroll. Miter’s built-for-construction payroll platform automatically applies state-specific pay rules, union agreement logic, and GPS-enabled time tracking. The software also maintains detailed audit trails that document scheduled versus actual hours. Accurate payroll goes out on time, and payments are logged in case of any state or union audits.

Frequently asked questions

Does reporting time pay count as overtime hours?

Generally, no. Under federal regulations, reporting time pay for hours not actually worked typically doesn’t count toward overtime. Only hours actually worked should be included in overtime calculations.

How do union or wage agreements affect show-up pay for construction crews?

A union agreement can require more pay than state law. In California, a CBA can also replace the state’s reporting time pay rule if it specifically addresses reporting time pay.

What happens if a worker submits a timesheet late?

A late timesheet may delay payroll processing, but it doesn’t eliminate wages already earned, including any reporting time pay owed.

Rachel Banton
Rachel Banton
Product Manager - Payroll
Rachel Banton leads research and development for Miter Payroll. Her team manages all of the moving parts that go into Miter's payroll calculations, including prevailing wage, certified payroll reporting, tax compliance, OT calculations, and more. She works to ensure Miter Payroll meets the complex, construction-specific needs of contractors in a helpful, approachable, and reliable way. Her favorite part of working on payroll is translating complicated and unique requirements into something tangible that Miter's engineers can build, and workers can see on their paychecks. Rachel lives in Brooklyn, NY and spends much of her free time walking in local parks with her lab mix, Ulysses.
Share this article
Stay up to date with the latest from Miter