Blog
Compliance
Payroll

Texas overtime laws: Guide for construction employers

Lilac Amber Kasper
Amber Kasper
Senior Launch Manager
Updated on
texas overtime laws

Construction projects often run on tight deadlines, but jobsites are unpredictable. An unexpected storm might delay a foundation pour on a commercial building job, requiring crews to make up for a full day of work. Or an HVAC crew may have to take on extra hours to rework a duct system after a sudden change order.

When these unexpected delays push crews beyond 40 hours in a single week, overtime becomes inevitable. Because Texas doesn’t have separate state overtime laws for private employers, contractors must navigate federal Fair Labor Standards Act (FLSA) rules to keep payroll compliant and avoid costly wage claims or penalties. 

This guide breaks down Texas overtime laws, highlighting key exemption rules, essential recordkeeping requirements, and practical ways to avoid common payroll mistakes.

What is overtime pay in Texas?

To understand how overtime works in Texas, private construction contractors should start with the fact that the state doesn’t enforce its own overtime statute. Employers simply follow FLSA rules to stay compliant. 

The FLSA requires employers, including construction companies, to pay hourly and non-exempt salaried workers time and a half (1.5x) their regular rate of pay for any additional hours over 40 in one workweek.

Texas overtime considerations include:

  • Only actual working hours count toward 40: Hours count toward overtime only when a worker performs actual job duties (including working lunches). Unpaid meal breaks PTO, holiday pay, and sick time don’t count toward the 40-hour threshold.
  • A workweek is a fixed seven-day period: Employers can establish any recurring seven-day workweek. It can start on any day, but contractors must apply it consistently.
  • Contractors can’t average hours: The FLSA doesn’t allow contractors to average one week’s hours with another to offset overtime pay. Employers must treat each workweek as an independent period, regardless of pay frequency.
  • There’s no daily overtime rule: Contractors must calculate overtime hours per week, not per day. If an employee works a 12-hour shift, but they’ve only worked 36 hours so far during the week, the contractor doesn’t owe overtime pay for that shift.
  • There’s no mandatory premium for non-standard hours: Companies don’t have to offer shift differentials for night, weekend, or holiday hours. But they can add them to their internal policies.

Unique rules for prevailing wage projects

When private contractors take on federal Davis-Bacon or state public projects governed by the Texas Prevailing Wage Act, they must calculate overtime differently:

  • Base overtime on published prevailing rates: Contractors must calculate overtime using the published prevailing basic hourly rate for the worker’s trade classification, even if it exceeds the worker’s standard pay rate.
  • Apply the 1.5x multiplier only to the base rate: Under 29 CFR 5.32, contractors apply the 1.5x multiplier only to the published basic hourly rate. Contractors must pay mandatory fringe benefits at the straight-time (1.0x) rate for all hours, including overtime.
  • Calculate a blended rate for multi-role workweeks: If an employee works across multiple pay rates or trade classifications in a single workweek, the contractor must divide total straight-time earnings by total hours worked to establish the blended regular rate. Then, they must multiply that rate by 1.5 for all overtime hours.
  • Avoid state noncompliance penalties: The state of Texas charges contractors a mandatory penalty of $60 per worker, per day for failing to pay correct prevailing wage and overtime rates on public projects.

Public sector exceptions

Texas Government Code Chapter 659 governs state agencies, public universities, and public sector workers. This only applies to construction workers who are internal, state-salaried staff, like a full-time maintenance technician employed by the Texas Department of Transportation or a state agency’s internal civil engineer.

Under the code, state agencies may grant nonexempt employees 1.5 hours of paid compensatory time off (comp time) for each overtime hour worked, rather than immediate cash pay. Agencies trigger overtime cash pay at 1.5x based on internal policy or when an employee hits statutory comp time caps (typically 240 hours for general state staff and 480 hours for public safety personnel). Exempt state employees may earn straight-time comp time of one hour off per hour worked for excess hours. However, they don’t generally qualify for 1.5x cash overtime.

Who is exempt from overtime pay in Texas?

Contractors must pay all manual laborers and other blue-collar workers overtime pay, regardless of their total earnings. However, some white-collar workers qualify for the EAP exemption for executive, administrative, or professional employees if they strictly satisfy the following criteria under 29 CFR 541:

  • Salary basis test (29 CFR 541.602): They must earn a fixed salary rather than an hourly rate.
  • Salary level test (29 CFR 541.600): They must earn a salary of at least $684 per week or $35,568 per year. Alternatively, under CFR 541.601, contractors can apply the highly compensated employee rule to office staff earning at least $107,432 per year who regularly perform at least one executive, administrative, or professional duty. This does not apply to field crews; blue-collar workers stay nonexempt regardless of pay.

However, meeting the salary requirements alone isn’t enough to make a worker exempt. Construction employers must also evaluate exempt status based on the following specific categories. 

Executive exemption (29 CFR 541.100)

Some superintendents, project supervisors, and foremen may qualify for exemption, but titles alone don’t determine exemption status. To be exempt, their primary duty must be managing a department or subdivision the business recognizes. They must regularly direct the work of two or more employees, and they must have at least some level of authority over hiring and firing decisions.

Administrative exemption (29 CFR 541.200)

Administrative employees qualify for exemption if their primary duty is performance of office or non-manual business operation tasks. They must also regularly use independent judgment and discretion to make decisions on important matters. This generally doesn’t include routine clerical, data entry, and assistant duties.

Professional exemption (CFR 29 541.300)

Exempt professionals include workers who use advanced knowledge in science or learning and acquired their knowledge through specialized intellectual instruction. Advanced knowledge typically refers to academic specializations. Very few construction workers qualify for professional exemption since the FLSA doesn’t consider most trade work advanced knowledge.

Salaried non-exempt status

Employers may make the mistake of assuming exemption status simply because a worker earns a salary. Under 29 CFR 541.3(a), tradesmen remain blue collar workers regardless of their level of specialized knowledge or earnings. This includes:

  • Carpenters
  • Electricians 
  • Mechanics
  • Plumbers
  • Iron workers
  • Craftsmen
  • Operating engineers
  • Construction laborers 

Contractors must pay employees overtime even if they earn wages on a salary basis.

How to calculate overtime pay in Texas

Employers must use the following rate calculation to determine how much overtime pay is in Texas:

Regular rate x 1.5 = Overtime rate

Overtime rate x overtime hours = Total overtime pay

Let’s say a journeyman carpenter earns a standard rate of $45 per hour and works 48 hours during a single workweek. The employer should perform the following calculation:

$45 x 1.5 = $67.50 

$67.50 x 8 = $540 

In this example, the carpenter earns $67.50 instead of his regular $45 for every overtime hour, adding $540 on top of his typical weekly pay.

Factors that can change overtime rate

Elements that can change an employee’s overtime rate include:

  • Multiple pay rates: If an employee performs work across multiple trades with different pay rates, the contractor must calculate the blended (weighted average) rate. The contractor determines this by dividing total straight-time earnings by total hours worked across all trades for the week, then applies the 1.5x overtime multiplier to that blended rate for all hours over 40.
  • Non-discretionary bonuses and shift differentials: Employers must include routine attendance or performance bonuses, piecework earnings, and shift differential premiums in the total compensation used to determine the worker’s regular hourly rate. Adding these earnings raises the worker’s base hourly rate for the workweek, which increases the total 1.5x overtime pay owed for hours worked over 40.
  • Salaried non-exempt workers: Contractors must determine a salaried worker’s average hourly pay before calculating overtime.
  • Public projects: When managing Davis-Bacon requirements, construction employers must exclude fringe benefits from the overtime calculation under 29 CFR 5.32.
  • Day rates: Workers who earn a rate per day rather than per hour still need a regular hourly rate for overtime calculations. Contractors determine the regular rate by dividing total weekly wages by the total hours worked.

Common Texas overtime violations and penalties

Construction overtime involves multiple variables, which means minor payroll errors can quickly turn into costly compliance penalties.

Misclassifying employees as exempt

Employers can’t classify an employee as exempt just because they earn a salary or have an executive job title. The worker’s actual job duties must strictly meet FLSA exemption criteria.

Requiring off-the-clock work

Contractors must pay crew members for all compensable work time, including tasks they perform outside of regular shifts. In construction, this commonly includes pre-shift equipment setup, safety briefings, and travel between jobsites during the workday.

Paying straight time instead of time-and-a-half

Employers must always apply the 1.5x multiplier to overtime hours, even if the employee worked those hours without prior authorization. While contractors can discipline employees for violating overtime authorization policies, they can’t withhold or reduce the required overtime pay.

Misclassifying workers as independent contractors

Contractors must pay overtime to any crew member who works set schedules, performs core company labor, and operates under direct supervision and control. Under Department of Labor (DOL) economic reality guidelines, these workers qualify as employees rather than independent contractors, regardless of whether they signed a 1099 agreement.

Penalties for noncompliance

Workers can file a complaint with the DOL Wage and Hour Division or the Texas Workforce Commission (TWC), which may investigate the claim and impose penalties for a violation. Consequences may include:

  • Civil money penalties of up to $2,515 per violation, which the DOL assesses for repeated or willful overtime violations
  • Back wages for unpaid work
  • Liquidated damages equal to 100% of the unpaid back wages
  • Court and attorney’s fees if the employee files a civil lawsuit

Accidental violations have a standard two-year statute of limitations, but willful violations have a three-year statute.

Overtime recordkeeping requirements for Texas employers

Clear records and time tracking data help Texas contractors stay consistent on overtime and hold up during audits or wage claims.

Under 29 CFR 516.2, construction employers must include the following details in their records for each non-exempt employee:

  • Employee name, ID or social security number (SSN), home address, sex, and occupation
  • Birth date for any employee under 19 years of age
  • Exact time of day and day of the week that the employee’s seven-day workweek begins
  • Total hours the employee worked per day and per week based on clock times, not just scheduled shifts
  • The regular hourly rate and the applicable overtime rate for each pay period
  • Total daily or weekly straight-time earnings and total overtime premium pay for the workweek
  • Itemized records of any additions to or deductions from wages for each pay period
  • Pay dates and pay periods based on the seven-day workweek established by the contractor

While internal cost coding is an optional management tool, tracking hours by jobsite and work classification is a legal requirement on public projects. Under the Davis-Bacon Act and Texas Government Code Chapter 2258, contractors must maintain daily classification-level records for certified payroll. This tracking also ensures employers accurately calculate blended regular rates when employees work across multiple pay rates in a single week.

Retention requirements

Under 29 CFR 516.5 and 29 CFR 516.6, construction companies must keep basic payroll records for at least three years and time tracking records for at least two years. However, contractors should retain all time records for the longer period because willful FLSA violations extend the statute of limitations to three years.

Simplify Texas overtime compliance with Miter

Construction employers must comply with Texas overtime rules, including workweek thresholds, exemption status classifications, and time tracking and recordkeeping across jobsites. Some workers can deduct qualifying overtime pay under the One Big Beautiful Bill Act, but employers still withhold applicable income taxes at payroll.

Miter Payroll and Miter Time Tracking apply the FLSA 40-hour threshold automatically, blend multiple pay rates and eligible bonuses into regular rate calculations, and connect every hour to the right job and cost code for recordkeeping. Miter also supports multi-state payroll to ensure compliance across jobsites in different jurisdictions.

Frequently asked questions

Does travel between jobsites count as work time in Texas?

Yes. While commuting between home and the jobsite doesn’t count as work, traveling between jobsites during working hours does.

Can Texas employers offer comp time instead of overtime pay?

Typically, no. Federal law only permits public-sector employers to offer comp time rather than overtime pay. Private construction companies must pay cash for overtime wages.

Does on-call time count toward overtime in Texas?

In some cases, yes. Under 29 CFR 785.17, on-call time only qualifies as working hours if the employee can’t use the time for their own purposes, such as having short callback windows, response times the employer imposes, or travel limitations. 

Does required safety training count toward overtime hours in Texas?

Mandatory safety training hours do count toward the 40-hour workweek and overtime hours.

Lilac Amber Kasper
Amber Kasper
Senior Launch Manager
Amber Kasper spent years managing payroll and compliance for a multi-entity, union, prevailing wage construction company in California, so she knows firsthand the complexity contractors deal with every day. She was also a Miter customer and went through the very implementation process she now leads. Today, Amber leads one of Miter’s largest launch teams, guiding contractors through go-live from data transfer and pay rate configuration to payroll, HR, and time tracking setup. She specializes in complex, multi-entity organizations and union payroll, bringing together real-world construction payroll experience and deep implementation expertise, making her a trusted partner for Miter customers.
Share this article
Stay up to date with the latest from Miter